TEIN EnduraPro Plus SP Coilovers - 2017+ Toyota 86 GT Limited, GT, G RWD (ZN6)

The new TEIN EnduraPro PLUS SP KIT is a high-performance OE-shape shock absorber kit. Each kit has been designed for use with the vehicle's original (OE) spring and upper-mount. The lower spring seat is shaped identical to the OE shock absorber. In addition to replacing worn or leaking OE dampers, exclusively-designed low-down springs included in the EnduraPro PLUS SP KIT allows for lowered ride height while also improving the ride quality and the cornering performance. Each TEIN EnduraPro PLUS SP KIT is sold as a set for 1 car, combining EnduraPro / EnduraPro PLUS dampers with the matching low-down springs, to offer a complete entry model damper kit at a very affordable price.

The TEIN EnduraPro PLUS SP KITs are made with a Hydraulic Bump Stopper (H.B.S) this provides more comfort and hight durability at the maximum passenger or cargo load. When regular shock absorbers fully stroke, their bump rubbers are compressed. The energy that is generated by that escapes as a repulsive force, which can disturb the vehicle's behavior. Furthermore, repeated full strokes can damage the damper. In the same situation the EnduraPro PLUS SP KIT, featuring H.B.S., internally convert the impact of the stroke to thermal energy (heat) and absorb it, strongly reducing the impact that disturbs the vehicle's behavior. With less damage to the dampers, H.B.S. also contributes to their durability. In shock absorbers with inactive or no H.B.S., the operative valve (green) floats, and oil flows freely through the base valve ports. Resistance to the flow from the shim stack then causes damping force. Near full compression, when the piston rod strokes beyond a predetermined point, the operative valve is pushed down and activates H.B.S.: the base valve ports are narrowed, blocking the oil flow. This results in high damping force. A relief valve serves to suppress sudden damping force increase when the pressure in the cylinder exceeds its regular level. The setup of the H.B.S. mechanism is optimized per vehicle model, with the right activation point and damping force.

EnduraPro SP Plus adds the following features:

Damping Force Adjustment
EnduraPro SP PLUS features 16-level damping force adjustment, for simultaneous adjustment of compression and rebound. Modify ride comfort and handling according to your preference, changing the properties of the shock absorber with the adjustment dial.

EDFC Compatibility
EnduraPro SP PLUS is compatible with the EDFC Series, which offer easy damping force adjustment from the driver's seat.

Features

• OE Shape
• Sealed construction
• Twin Tube internal construction
• Fortified Installation Points
• Fortified Shell Case with Large Oil Capacity
• High-Performance Damper Oil
• Damping force adjustment
• EDFC Compatible
• 1-year manufacturer's limited warranty

Specifications

Vehicle Fitment

• Vehicle Region: JPN
• Vehicle: Toyota 86 GT Limited, GT, G
• Model Years: 2017+
• Production Years: 2016.08+
• Chassis: ZN6
• Engine: 2000
• Drivetrain: RWD
• Notes: Not compatible with Pre-Facelift models (July 2016 or earlier).
• Part Number: VSQ54-B1SS2
• EDFC Compatible: Yes

EDFC Series Enables In-Car Damping Force Adjustment!

• With EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately.


• Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE / EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of ADVANCE Needle.


• With EDFC ACTIVE / EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and/or vehicle speed, to offer very smooth and slick ride like never before.
• EDFC Vehicle Options for ENDURAPROPLUSSPKIT